Izdelki za oprema za embalažo (195)

Confezionatrici Manuali Angolari 45/N 65/N 80/N manuali angolari economiche a tunnel con braccio saldatore a discesa manuale e riapertura gestita da magnete. Dotate di un unico nastro trasportatore a rete in teflon, che automaticamente trasporta il prodotto nel tunnel di termoretrazione, dopo la saldatura. Due cicli di movimentazione del nastro trasportatore, selezionabili da pannello di controllo: avanti-avanti e avanti-indietro. Avanti-Avanti, con fuoriuscita del prodotto dal lato opposto al carico, per maggiore produttività. Avanti-Indietro, con ritorno del prodotto all’operatore, per prodotti fragili o per esigenze logistiche. Possibile utilizzo delle confezionatrici manuali angolari come solo saldatrici, senza termoretrazione, con lo spegnimento delle resistenze. Il tunnel di termoretrazione è configurato a 90° rispetto alla direzione di inserimento del prodotto. Encoder per il controllo del posizionamento del prodotto all’interno del tunnel di termoretrazione.

Products from Pactur are available in different sizes (TL/30, TL/70 and TL/80) obviously depending on the size of the products, around which the bag must be heat-shrinked, which is wrapped by the various packaging machines. Within the range of heat-shrinking tunnels, there are three types, available for each model: Teflon mesh conveyor tunnel; tunnel with metal rod conveyor belt, covered with silicone rubber; wire mesh conveyor belt. These variants allow the shrink oven to be adapted to the shape of the product, the type of film used to bag it and the desired shrink result. For example, for light and irregularly shaped products, Teflon mesh carpet is suitable. On the other hand, if the products must present a remarkable aesthetic result, with an excellent retraction effect also on the underside, the optimal solution is the tunnel with silicone bar belt. On the other hand, when the film used is polyethylene, when the products are heavy and the

Le Confezionatrici Semiautomatiche Angolari con braccio saldatore manuale sono performanti e di semplice utilizzo e sono definite angolari perchè il tunnel di termoretrazione è a 90° rispetto alla direzione di inserimento del prodotto. Braccio saldatore disponibile sia a discesa manuale e riapertura gestita da magnete, sia a discesa automatica, comandata da pistone pneumatico. Sono presenti sulla macchina tre comandi del pistone pneumatico: pulsanti, pedale e temporizzatore. Dotate di due nastri trasportatori a rete in teflon, con controllo indipendente: il primo nastro trasporta automaticamente il prodotto sul secondo nastro, dopo la saldatura mentre il secondo nastro gira all’interno del tunnel di termoretrazione. In tal modo, le operazioni di saldatura e di termoretrazione sono svincolate e la produttività è incrementata. Non appena un prodotto viene saldato, questo parte verso il secondo nastro e l’operatore può caricare immediatamente il prodotto successivo.

Place the pallets (EPAL) using a simple hand pallet truck, attach the film to the base of the pallet, select the wrapping program and press the start button.The machine automatically winding and stops. Cut the film manually. Attention: the pallet must not have the inner crosspieces on the side of the transpallet. STRETCH FILM FOR WRAPPING MACHINES: The film normally used on winding machines is 23 my standard in rolls of approximately 16 kg. With 1 roll of film you are able to wrap an average of 60 pallets. The film is also available in white 30 my, suitable to protect the contents of the pallets from sunlight. The white film is opaque and can be used to hide valuable goods during transport. The type of films supplied by us is of premium quality and is suitable to be used on our machines. We recommend using only top quality film in that it significantly reduces packaging waste and failures due to the use of an unsuitable product. Capacity:Kg. 1000 (1500 kg with optional) Turntable rotation speed:variable 4 - 7 rpm Max. pallet dimensions:mm. 1000 x 1200 Max. pallet height:mm 2200 h (2700 mm with optional) Turntable diameter:mm. 1500 Turntable height:mm. 90 Power supply:380V 50Hz. + T + N Installed electric power:Kw 0,6 Dimensions:mm. 1650x2520x2560 h Weight:Kg. 550

CARTON SEALER MACHINE MOD. FP 9070 - DOUBLE DRIVE SYSTEM CONSISTS OF TWO LOWER SIDE BELTS AND TWO UPPER BELTS. Machine suitable for large boxes, the double drive system ensures a regular feed even in presence of high and light boxes. The two heads simultaneously apply a strip of tape taping above and below the box. Ideal for close fixed format boxes (with constant height and width). Structure of the body in painted steel. Movement of boxes happens via two lower dive belts and two upper drive belts, adjustments for the different formats are carried out using flywheels. The machine is equipped with idle rollers 400 mm length for loading and unloading. The machine is equipped with wheels with brake. Carton dimensions:Min 150 x 200 x 120 mm Max Unlimited x 700 x 750 mm Tape width:mm 50 (75 optional) Tape type:PP - PVC Operation speed:20 m/min Belt drive:Lower side/Upper

Le incappucciatrici Bocedi sono costruite con un’esperienza pluriennale e costantemente aggiornate negli anni per soddisfare i nuovi standard di marcato. Sono macchine progettate per automatizzare la fase di incappucciamento di fine linea e sono disponibili in due versioni differenti. Le incappucciatrici lavorano con film termoretraibile tubolare, che viene srotolato automaticamente e tagliato su misura del pallet da incappucciare grazie ad un sistema di riconoscimento automatico del carico. Il cappuccio viene poi messo a copertura del carico senza entrarne in contatto, per garantire stabilità anche ai carichi più fragili e delicati. Vari formati di pallet Le incappucciatrici posso essere configurate da 1 a 6 bobine diverse di film, in taglia o spessore, offrendo la possibilità di incappucciare vari formati di pallet in un’unica macchina. Cappuccio elastico tagliato su misura La dimensione dei pallet viene identificata automaticamente Capacità:fino a 240 pallet/ora Dimensioni minime pallet:400×400 mm Dimensioni massimepallet:1350×1250 mm

The semi-automatic strapping machines are ideal for tying boxes, packages, bundles, etc. in warehouses, workshops, supermarkets and anywhere there safe packing is needed. The plastic strap helps to reinforce the packaging and ensure ligation. The printed strap is also available. If placed around the packaging, the strap is a valuable burglar resistant tool, if the package is opened it can not be closed with the same type of strap. The model FP8022 allows to strap the product with minimum size of 60x60x10 mm and it uses strap with width 6-9-12 mm and with max thickness of 0,6 mm. Strap width:mm. 6- 9- 12 Strap thickness:mm. 0,5-0,6 Air pressure:6/7 bar Air consumpt:12 Lt. / sec Weight:85 Kg

Semiautomatic mobile strapping machine for the strapping of pallets, complete with a channel for inserting the strap. New compact model with closed body and internal reel holder. Hinged raceway equipped with double roll to facilitate the insertion of the strap into the base of the pallet. Strapping sling channel with containment flaps (avoiding the exit of the strap). Electronic voltage regulation via potentiometer. Electronic regulation of the strap throw length. Safety function with acoustic alarm and tension delay (when the operator inserts the strap he has time to remove the hand). Strap width:mm. 12 Strap thickness:mm. 0,6 - 0,65 Reel internal diameter:mm. 200 Power supply:220 V 3 phase Weight:80 Kg

The semi-automatic strapping machines are ideal for tying boxes, packages, bundles, etc. in warehouses, workshops, supermarkets and anywhere there safe packing is needed. The plastic strap helps to reinforce the packaging and ensure ligation. The printed strap is also available. If placed around the packaging, the strap is a valuable burglar resistant tool, if the package is opened it can not be closed with the same type of strap Strap width:mm. 5 – 9 – 12 Strap thickness:mm. 0,5-0,6 Air pressure:6/7 bar Air consumpt:12 Lt. / sec Weight:100 Kg

Self-propelled battery wrapper, suitable for wrapping with stretch film pallets with a maximum height of mm. 2050, also with an irregular shape. However, the base of the pallet must have a regular shape to allow the feeler wheel to follow its shape. Rotating automatically around the pallet, it wraps with stretch film or net. Equipped with rudder for manual steering with forward-reverse buttons, maintenance-free gel traction batteries, built-in battery charger, three-phase electric motors with inverter, height-adjustable guide wheel, front safety bumper. The FP GLOBO model is equipped with a folding arm with reel holder trolley.Keyboard lock Rotation speed adjustable from 5 to 12 rpm Up/down reel carriage speed from 1.3 to 5.4 m/min Turns at the base/top of the pallet from 1 to 10 Pallet height reading delay Film tension adjustment Film pre-stretch adjustment Reel change comfort cycle CYCLES SELECTABLE FROM Weight:Kg. 300 Overall size:mm. 1280x1850x1000h

Wrapping machine semi-automatic with turntable mod. FP BOX - TIRES, suitable to the winding of tires coupled with internal diameters from 300 mm to 500 mm. The rotation of the table is motorized, activated by the pedal and with adjustable speed; the movement of ascent / descent coil is manual with reel holder counterweighted. The machine is equipped with the compressed air device by drive via lever valve for centering and locking of the wheels, consisting of two jaws which are installed on the expansion of extractable pins. To lock and unlock the tires is sufficient to drive the valve lever. The group expansion is raised by about 150 mm. from the plane table. Load:200 Kg Internal tyres diameter:da mm. 300 a 500 (adjustable) Turmtable diameter:Max mm. 1000 Max package dimensions:mm. 800 x 800 x 1000 h Height from the floor:mm. 700 Power:Kw 0,37 Weight:200 Kg Dimensions:1600x1000x1800 h

Wrapping machine with turntable FP ECO/A ROLL for wrapping carriages (roll container), with manual hooking/cutting of the film and automatic wrapping cycle, limit switches adjustable in height to stop reel holder, adjustable limit switches at the base of the reel holder to start wrapping to the desired height, touch panel display with 3 programs winding, truck driving, foot operated mechanical lock, loading ramp for pallet trucks. (Machine CE). Maximum load:kg 2000 Rotaring table speed:7 rpm Maximum dimensions trolley:800 x 1200 (600 x 1400) Pallet max height:mm 2200 h (2400 mm with optional) Turntable diameter:mm 1500

Le Navette Bocedi sono un accessorio indispensabile quando il carico deve essere trasferito automaticamente da/per la linea di imballaggio. Le navette hanno dimensioni personalizzabili e possono essere facilmente integrate in impianti già esistenti.

Simple and reliable, it uses paper and polypropylene tapes 29 mm wide and 150 meters long. in the standard version. The machine can be installed on a trolley with motorized reel-holder for rolls of 500-1000 meters. (max. diam. 360 mm). Maximum banding light mm. 450x200H. Speed ​​up to 20 cycles per minute. The tension of the band is adjustable by means of a handwheel positioned inside the wheeled base. Manual or automatic operation with sensor. The FPWK 0230 banding machine in addition to the classic use in graphic arts, bookbinding, paper converting, is particularly suitable for the realization of multiple packs or for the combination of multiple products in promotional sales. Available in two models: FPWK0230B: standard bench version with adjustable strap tension via screw located inside the machine. FPWK0230P: version equipped with motorized reel holder with wheels. The strap tension can be adjusted by means of a handle located inside the machine. Usable material:rolls of paper or polypropylene Usable tape width:mm 29 Max. speed:20 cycles/min. Arc size:mm 470 x 210 Max. dimensions bundle to tie:mm. 450 x 200 Max. product weight:kg 10 Band tension:5~40 N

MOTORIZED ROTARY TABLE WITH INTEGRATED ELECTRONIC SCALE Motorized rotary table for manual pallet and packs wrapping, mounted on a compact structure in painted steel that can be forklifted with a transpallet. The external electrical panel is equipped with a support stand. The table is fixed on a weighing platform with 4 load cells. Thanks to the integrated scale with weight indicator, it is possible to weigh the pallets or packages in real time before wrapping. TECHNICAL FEATURES WEIGHT INDICATOR 5-key functional waterproof keyboard 25 mm backlit LCD display. with 6 high-contrast digits and icons to indicate active functions IP54 ABS enclosure, easy to clean and resistant in harsh and corrosive environments Suitable for use on table, column or wall Adjustable angle fixing bracket supplied 24 bit A/D converter, 4 channels, max 200 conv./sec. autoselect and up to 8 signal linearization points Max 10,000e or multifield 3 x 3000e at 0.3 µV/d in version Example model:Rotating platform 1.0-BE Rotary table speed:Variable with inverter 1-3 rpm. (other speeds on request) Maximum load:Kg. 500 Diameter max. pack:mm. 800 Rotary table diameter:mm. 1000

Progettata per offrire una protezione completa sui 6 lati del carico quando combinata a un’incappucciatrice, la metti foglio applica automaticamente un foglio di plastica non estensibile sopra il pallet prima che venga messa la merce. Per il confezionamento palletless la macchina applica lo strato di plastica estremamente resistente e non estendibile che servirà come base per il trasporto e lo stoccaggio del carico senza pallet. Il carico incappucciato con l’aggiunta di mettifoglio vanta una protezione totale da acqua, intemperie, polvere e umidità. La metti foglio è configurabile con due tipi differenti di plastica e può funzionare anche con pluriball.

GEM F470 - F520 - F670 CARTON SEALERS WITH MANUAL ADJUSTMENT - AUTOMATIC FLAP CLOSER AND SIDE DRIVE BELTS Carton sealer with manual dimensioning and and automatic flap closer. It folds automatically the four upper flaps and seals with auto-adhesive tape the top and bottom of batches of uniform size, American-type boxes. The upper taping unit has a patented system which, by regulating a spring, enables the subsequent weight on the box to be preset and therefore any differences in height of the boxes to be absorbed. The boxes are fed by lateral conveyor belts, driven by a single motor thus optimising even sliding of the boxes and ensuring perfect alignment of the upper and lower flaps which in turn guarantees perfect sealing. Example model:GEM F470 Boxes width min:mm 100 Boxes width max:mm 520 Boxes lenght min:mm 150 Boxes lenght max:mm 600 Boxes eight min:mm 100 Boxes eight max:mm 670 Tape width:mm 50 (75 option) Operation speed:22 m/min Compressed air:6 Bar Air consumption:2,5 Nl

GSL10 è un'incartonatrice orizzontale atta a formare, riempire e chiudere cartoni di tipo americano. La chiusura del cartone può essere effettuata a nastro oppure con colla a caldo. GSL10 garantisce l’apertura del cartone positiva e forzata, affidabilità nell’alimentazione e nel posizionamento dei prodotti, un design ergonomico ed un cambio del formato rapido e semplice. GSL10 può trattare cartoni che di varie dimensioni, da un minimo di 150x100x100 mm fino a 600x400x400 mm. L’alimentazione prodotto può essere posizionata sia a destra che a sinistra del magazzino cartoni. GSL10 permette di trattare fino a 10 cartoni al minuto, in funzione del formato del cartone e della disposizione del prodotto al suo interno. L’incartonatrice può essere corredata di gruppi opzionali quali: lettori di codici a barre, videocamere, stampanti ink jet, etichettatrici (per etichette prestampate o P&A), stazioni di scarto.

La linea confezionatrice angolare semiautomatica monoblocco con due nastri trasportatori, nastro saldatrice indipendente dal nastro tunnel, è adatta al confezionamento in semiautomatico di diversi prodotti singoli o multipli, utilizzando i tradizionali film termoretraibili. Realizzata in vari modelli la macchina si presenta con minimo ingombro di spazio, pratica e affidabile. Permette di ottenere ottimi risultati con poche operazioni.

MECHANICAL/HYDRAULIC FM LIFTERS FOR FURNITURE Ideal for transporting furniture, safes, containers and machine tools. The FM series mechanical/hydraulic lifter kit for furniture is suitable for moving furniture components in furniture stores, during removals or simply when you need to move furniture safely and without any effort. The maximum load capacity of the pair is 600kg (FM60 mechanical model) and 1800kg (FM180/A - FM 180/B hydraulic models). The kit consists of 2 lifts with lifting plates with non-slip coating and a strap for fixing. Lifting is by means of a screw with crank for the FM 60 model and a practical lever with a hydraulic pump for FM 180. The lifts are equipped with non-marking pivoting rubber wheels with steering lever. RAL 1028 yellow paint for the FM 180 models and blue for the FM 60 model Operation: Position the lifting plates below the part to be lifted, adjust the upper support and tension the safety belt. Example model:FM 180 A Load (Kg):1800 Lift height (mm):100 Lifting plate (mm):600x60 Wheels (diameter):150

The MINIMA packaging machine designed for medium/small production realities (artisanal, commercial, etc.), makes versatility and minimum bulk its strengths. Absolute reliability and high efficiency, combined with high operating silence, low energy consumption and ease of use, unique in its kind, are qualities that make it a cutting-edge product. All the functions of the machine are displayed and controlled electronically thanks to the digital panel. The dimensions of the support surface are 350x240x140 mm h (height of the closed hood) The volume cannot be completely filled by the box or by the product to be packaged as space must always be left for the passage of hot air around the product. The choice of the machine must take into account that: the front opening of the "Minima" bell is 23 cm but laterally drops down to zero the dimensions of the box (height + depth) must not exceed the width of the reel 350 mm also considering that there must always be at least 50 mm of waste. Sealing bars dimensions:mm. 380 x 250 Chamber internal volume:mm. 350 x 240 x 140 h Max. coil size:diam. mm. 250 - width mm. 350 Power supply:220V Installed power:1 kw Actual consumption:kw 0.55 Machine dimensions:mm. 930 x 550 x 370 h. Package Dimensions:mm. 1040 x 650 x 570 Net/Gross Weight:Kg. 36/48

CARTON SEALER MACHINE MOD. GEM 350 / GEM 360 / GEM 820 WITH ADJUSTABLE FORMAT AND WITH UPPER AND LOWER DRIVE BELTS The two heads simultaneously apply a strip of tape taping above and below the box. Ideal for close boxes high and narrow. Ideal for fixed format boxes close (with constant height and width). Structure of the machine body made of sheet steel bent, bolted and painted. The movement of the cartons is done by two side drive belts driven by a single motor, adjustments for the different formats are made through flywheels. The machine is equipped with 4 wheels with brakes. Example model:GEM 52 minimum width:100 mm with 50 mm head/150 mm with 75 mm head maximum width:mm 500 minimum length:mm. 150 maximum length:unlimited minimum height:mm 100 maximum height:mm 500 Max tape width:mm 50 (75 optional) Operation speed:22 m/min.

La FB1000 è la linea base della famiglia di incappucciatrici a cappuccio elastico Bocedi, ed è una soluzione molto apprezzata sul mercato. Small, standard, large ed extralarge È una macchina leale al ciclo di imballaggio di fine linea, l’incappucciatrice FB1000 è disponibile in quattro versioni small, standard, large ed extralarge. Capace di incappucciare pallet di dimensioni 2600x1400mm, la FB1000 può essere accessoriata fino a tre bobine di film estendibile, con avanzamento e selezione automatica del film, per garantire flessibilità nell’imballare diverse taglie e tipologie di merce. Bassa manutenzione L’incappucciatrice richiede minima manutenzione. È costruita con componenti meccanici di alta qualità, semplici e consolidati nel tempo, per dare continuità al ciclo d’imballaggio e azzerare i tempi di fermo impianto. Facile da operare Lavorare con la FB1000 è così facile che il suo sistema di srotolamento film ha ottenuto un brevetto proprio per la sua semplicità. Capacità:70 pallet/ora Dimensioni minime pallet:600×600 mm Dimensioni massime pallet:2600×1400 mm FB1000 Small:950x800mm FB1000 Standard:1350x1150mm FB1000 XL:1800x1400mm FB1000 XXL:2600x1400mm

The advantages of cloth filters and biorulli in a compact system for small community water treatment. Compact system for the biological purification treatment with biodiscs combined with cloth filter for the separation of excess sludge. The biocombi compact system features two treatment phases (biological treatment and separation of excess sludge) gathered in a single tank. The standard model provides the complete provision of a carbon steel tank treated and painted with a fiberglass modular cover easily removable, and an electrical switchboard on the machine with IP 55 protection. The moving parts (disc roller and drum filter) are actuated by a single geared motor with power included between 0,75 and 1,10 kW. -Minimum energy consumption -Reduced maintenance -Easy accessibility -Increased floor space (compact construction)

COMPLETELY AUTOMATIC STRAPPING MACHINE MOD. JN85-M Fully automatic strapping machine with high speed and reliability. The machine is equipped with motorized belts for insertion in packaging lines, aluminum arc with multiple flaps to facilitate the launch of the strap and the subsequent release and electrical system with Omron PLC. The electrical panel of the machine can manage the motorized loading and unloading belts (optional) and allows the use of the strapping machine in lines without operator. Strap width:mm. 9-12 Strap thickness:mm. 0,5-0,65 Reel internal diameter:mm. 200 Power supply:400 V. three-phase Weight:307 Kg

The fully automatic strapping machine mod. TP 201 with side sealing is particularly suitable for strapping furniture, household appliances, palletised loads and high packages. It can be inserted in lines where the available space or the limited height of the conveyor do not allow the use of a standard strapping machine. The strap is automatically launched, tensioned, welded and cut, speeding up the strapping operations. The strapping machine, suitably modified, can be easily inserted into automatic packaging lines and can also work without an operator. Strap width:mm. 12 Strap thickness:mm. 0,6 - 0,65 Reel internal diameter:mm. 200 Power supply:380 V 3 phase Weight:200 Kg

MINI TWIST 140-160 CABLE - SEALING MACHINES WITH TWIST BAND Twisting manual machine, designed and built to tie different kinds of product, with a twistband wire. It is mode in varnished steel assuring a long life. The MINI TWIST is user-friendly and astonishes for its simplicity. It makes possible a grow of productivity of the worker himself. The machine is feeded by a reel of plastic wire, so-called "Twist band" which has a metal wire inside. Example model:140 Twist Cable Working:pneumatic Air consumption:50 Lt. / min Air pressure:6 bar Machine cycles:30 pcs. / min. Autonomy:About 5000 sealings Type of seal:Twisted lace Reels lenght:600-800 mt.

The shrink tunnel, equipped with temperature adjustments, height and speed, is incorporated in order to make the machine compact and versatile, suitable for series production. The welding time is electronically set and the absence of fumes is ensured by teflon-coated blades. The sealing bar motorized, equipped with security system, the closed circuit cooling plant and motorized scrap-winder, are part of the standard equipment of the machine. FEATURES Digital panel with 6 programs Descent sealing bar manual or automatic Discharge conveyor for product Legs with locking wheels Only welding and welding + retraction Sealing bars with closed-circuit cooling system and patented safety system Emergency switch Teflon coated sealing bars Electromechanical automats Welding speed automatic controller Motorized conveyor belt with adjustable height Motorized scrap-winder Air flow shrink tunnel swiveling Adjustable temperature with electronic temperature controller Sealing bars size:mm. 550x420 Support plan size:mm. 500x380 Max pack height:mm.200 Tunnel entrance size:mm. 440 x 240 h. Power supply:380V Installed power:5,7 kw Max reel width:mm.600 Hourly production:900 pcs machine size :mm.2330 x 730 x 1380 h Package Size :mm. 900 x 2400 x 1550 h Net/gross machine weight:287 /343 Kg

Pneumatic clipping machine suitable for closing bags with twistband (plastic band with one metal core), max. diameter of binding mm. 11-28-38. Bag sealer mod. MINI TWIST working with twistband wire (plastic wire with metal core). Robust and secure machine, entirely made of painted steel suitable for closing packs with easily opened plasticised wire. The parts in contact are entirely made of aluminum. Available in 3 models. Example model:TWIST 100 Working:pneumatic Air consumption:50 Lt. / min. Air pressure:6 bar Machine cycles:40 pcs./min Autonomy:about 6000 clips Type of seal:Twisted lace Length reel:600-800 mt.

Gli anelli di termoretrazione vengono prodotti qui in Bocedi con 50 anni di esperienza. Negli anni hanno saputo dimostrare la loro affidabilità e hanno mantenuto una prodizione attiva. Acciaio inox Il processo di termoretrazione viene fatto per mezzo di una struttura in acciaio inox che utilizza un sistema di aria calda parzialmente riciclata, che va a scaldare la plastica attorno al carico. Il sistema innovativo senza fiamma libera funziona con qualsiasi gas a bassa pressione, e preserva l’elasticità e la resistenza del film termoretraibile, riducendo inoltre i consumi energetici. Gamma completa La gamma completa di anelli di termoretrazione consente di trovare la soluzione perfetta a qualsiasi ciclo di imballaggio, a seconda della taglia di pallet gli anelli possono lavorare fino a una velocità di 240 pallet/ora. Stabilità del carico Tutta la gamma di anelli di termoretrazione può essere completata da un sistema di sollevamento pallet che permette al cappuccio Dimensioni minime pallet:400×400 mm Dimensioni massime pallet:3000×1500 mm